The APSAM universal articulating arm mount supports virtually any display up to 55" with hole patterns up to 27.7" horizontally and 19" vertically. The APSAM also features a full 27" of extension and up to 150 degrees of rotation for larger displays, it also folds to a low 3.5" profile as has +/-15 degrees of tilt. The APSAM mount is designed with a lift and lock design for ease of installation and is constructed with a 17" wall plate which is specifically designed for installation to standard 16" studs. The APSAM is well constructed with 27 LBS of 100% High Grade Steel providing a sturdy and reliable mount.Price:
The ALAML 75x75mm, 100x100mm, 100x200mm, 200x200mm VESA arm mount provides up to 20" of extension, collapses to 2.4", has 180 degrees of rotation and +/- 15 degrees of tilt. The ALAML mount is constructed with 8LBS of 100% High Grade Steel providing a sturdy and reliable mount. The ALAML uses separate cover pieces for the wall plate and pivot joints providing a clean finished look. The ALAML mount will fit the majority of LCD Displays up to 37". Most LCD Displays 37" and smaller conforms to the VESA Standards. For more information on what exact hole patterns this mount will fit please see the Supported VESA pattern in specifications section. The tilt mechanism utilizes a "one touch" design allowing an individual user to adjust the angle with one hand while locking the angle of tilt with the other.
This is a very substantial mount with Dual arms and heavy guage steel. The arms extend over 20" from the wall yet fold to less than 5". Even at full extension, this mount has very little sag or twist. It is rated for up to 165lbs and most displays 55" and smaller weigh under 100lbs. The unit has dual tilt adjustment knobs and it will tilt forward or back 15 degrees. The wall plate is 19" wide and has wide slots making it easy to mount into standard 16" studs even if they are not exactly 16" apart. Thus, the arms may be visible on the sides of 32" units. The universal design will fit any display with a hole pattern up to 26.3" wide and 18" tall. The wall plate is 1/8" thick and very stable and includes a large center hole for cable pass-though into the wall. This mount will swivel approximately 150 degrees depending on the size of your display. Dual TV locking screws are included to prevent accidental liftoff of the display. Installation instructions and hardware included.
The APTMS tilt mount features a universal design that allows you to mount the vast majority of LED/LCD/Plasma TVs in the 23-37" size range. Specifically, the APTMS supports hole patterns up to 17.25" horizontally by 12.25" vertically and VESA hole patterns up to 400x200mm. The APTMS is designed with a slim 1.9" profile yet still offers up to 15° of forward tilt. The APTMS is constructed with 5 LBS of 100% High Grade Steel providing a sturdy and reliable mount. The 19.25" wide wall plate will support two stud installation for studs up to 19" apart (most US homes have studs which are 16" apart). The two arm brackets attach to the TV separate from the wall plate allowing for easy "Lift n Lock" installation. Each arm bracket includes a safety screw to prevent accidental liftoff. The wall plate includes a built in bubble level and a separate 6" 3-Axis magnetic bubble level is provided as well. The paint is a high quality textured powder coat paint. The mount ships with all necessary mounting hardware.